Operation Manual

19FG 2
English
: Set the filing angle (2) – to sharpen
the left-hand row of cutters, turn the
guide to the right (clockwise).
: Tighten down the nut.
: Position the master cutter (3) below
the center of the nut (1).
Aligning the Filing Frame
: Position the round file (1) between
the side plate and depth gauge of
the master cutter by swinging and
lifting the filing frame.
: Turn the adjusting screw (2)
(counterclockwise to lower file –
clockwise to raise file) until about
1/10 of file diameter projects above
the top plate.
564BA008 KN
2
3
564BA009 KN
1
1
564BA010 KN
2
564BA011 KN
564BA028 KN
1/10 ø