Operation Manual

16
English
FG 2
: Secure the base plate to the bench
using either the wood screws (A)
provided or the screw clamps (B)
available as special accessories.
: Place the chain rest (1) on the base
plate (2) – the clamping lever (3)
must face away from the bench.
: Make sure the studs (4) engage the
holes.
: Fit the hex head screw (5) through
the center hole from above.
: Fit and tighten down the wingnut (6)
firmly.
: Position the filing frame (7) on the
swivel arm (8) so that the stop pin
engages the slot.
: Tighten down the nut (9) firmly.
Mounting the Tool
564BA000 KN
A
B
44
564BA001 KN
1
2
3
6
5
564BA002 KN
9
8
7