Operation Manual

22
English
FG 2
: Sharpen the first cutter in the
second row.
: Check the cutter length (A).
: If it differs from the length of the
master cutter, move the stop (3)
forwards or backwards, resharpen
and check length (A) again.
: If the length is correct, sharpen all
cutters in the second row using this
setting.
Depth Gauges
: Select the filing gauge (special
accessory) that matches the chain
pitch.
: Place the selected filing gauge
on the chain. If the depth gauge
projects above the filing gauge, it
has to be lowered.
: Set the filing angle on the guide
to 0°.
: Fit triangular file (special accessory)
in place of the round file.
: Pull chain along until a depth gauge
is under the file.
: Adjust the stop (3) so that the file (2)
does not touch the cutting edge.
564BA016 KN
A
564BA023 KN
3
Chain Pitch Filing Gauge
inch mm Part No.
1
/
4
6.35 1110 893 4000
3
/
8
PMN 9.32 0000 893 4000
3
/
8
P 9.32 1110 893 4000
0.325 8.25 1110 893 4000
3
/
8
9.32 1110 893 4000
0.404 10.26 1106 893 4000
564BA017 KN
564BA018 KN
30
35
564BA019 KN
33
2