Operation Manual

FG 1
English
20
N File the top of the depth gauge
parallel to the stamped service
marking (see arrow) – but do not
lower the highest point of the depth
gauge in this process.
N Place the filing gauge on the chain –
the highest point of the depth gauge
must be level with the filing gauge.
The kickback tendency of the saw is
increased if the depth gauges are too
low.
Chains with humped drive links
The upper part of the humped drive link
(with service marking) is lowered along
with the depth gauge.
The other parts of the humped drive link
must not be filed since this may increase
the kickback tendency of the saw.
After sharpening
N Clean the chain thoroughly, remove
filings or grinding dust – lubricate
the chain thoroughly with oil.
N Lubricate the guide with oil.
N Impregnate the felt in the guide with
oil to ensure free movement of the
filing frame.
N Rotate the round file at regular
intervals while filing to avoid one-
sided wear.
564BA026 KN
564BA025 KN
Maintenance and Care
565BA022 KN
Oil