Operation Manual

FG 1
English
16
Adjusting Filing Angle
N Check filing angle in the following
table
N Swing the filing frame upwards.
N Loosen the knurled nut (1).
N To rotate the guide, lift it clear of the
teeth.
N Set the filing angle (2), e.g. 30°.
N Tighten down the knurled nut.
N Position the master cutter (3) below
the center of the knurled nut (1).
Aligning the Filing Frame
N Position the round file (1) between
the side plate and depth gauge of
the master cutter by swinging and
lifting the filing frame.
N Turn the acorn nut (2) to set filing
frame at a right angle to the
clamping jaws.
Setting Up
Chain type Filing angle
Rapid Standard (RC...) 30°
Rapid Micro (RM...) 30°
Rapid Super (RS...) 30°
Picco Micro (PM...) 30°
Picco-Super (PS...) 30°
Ripping chain
(RCX, RMX, PMX) 10°
1
565BA019 KN
565BA024 KN
565BA004 KN
2
45
45
35
25
35
25
0
0
3
565BA006 KN
1
2
1
565BA007 KN
90°
565BA027 KN
2