Owner's Manual

17FCB-KM
English / USA
For periods of about 3 months or longer:
: Remove, clean and inspect the
blad.
: If the KombiTool is stored
separately, fit the protective cap on
the drive tube to avoid dirt getting
into the coupling.
: Store the machine in a dry, high or
locked location – out of the reach of
children and other unauthorized
persons.
Have worn depth wheel replaced by
your dealer. STIHL recommends that
maintenance and repair work be carried
out only by authorized STIHL dealers.
: The end of the thread on screw (1)
is caulked to ensure that the
wingnut (2) does not work loose
and be lost.
A very high torque has to be applied to
remove the wingnut from the screw. If
the parts are then reassembled, the
captive function is no longer
guaranteed. In such a case the screw
and wingnut should be replaced by your
dealer.
Removing the skirt
: Release and remove screw (1)
along with washer (2).
: Pull the skirt (3) off the lug (4) and
out of the deflector
Position of skirt
: Position the skirt (3) correctly in
relation to depth wheel (5):
If wheel is on left, the skirt must
project to the right.
Storing the Machine
Replacing the Depth Wheel
1
241BA024 KN
2
Replacing the Skirt
3
4
241BA009 KN
1
2
5
241BA015 KN
3