Owner's Manual

FC 70 C
English
14
Lawn edging
N Starting the engine
N Start the cut at no less than half
throttle and continue cutting at full
throttle.
N Hold and guide your edger so that
the blade is vertical.
N Cut steadily so that the engine is not
lugged down – do not apply force.
N Cut at no more than a normal
walking pace.
N Do not push the blade into the
ground.
N Always walk forwards when cutting,
do not pull the unit towards you.
N Edge at a steady pace to avoid
having to make several passes.
N Use the gunning sight (1) to line up
the blade on the edge.
Your new power tool comes with the
loop handle mounted on the drive tube,
but it must be turned and lined up to suit
your requirements.
Adjusting the Loop Handle
N Loosen the star knob (1).
N Turn the handle to the vertical
position.
241BA004 KN
90°
241BA005 KN
1
Mounting the Loop Handle
1
546BA010 KN
545BA004 KN