Instruction Manual

FC 56 C
English
20
Starting the Engine
N Press the manual fuel pump
bulb (4) at least five times – even if
the bulb is already filled with fuel.
Cold engine (cold start)
N Press in the choke lever (5) and turn
it to g at the same time.
Warm engine (warm start)
N Press in the choke lever (5) and turn
it to < at the same time.
Also use this setting if the engine has
been running but is still cold.
Starting
N Place the unit on the ground: Check
that the cutting blade is not touching
the ground of any other obstacles.
N Make sure you have a firm footing.
N Hold the unit firmly on the ground
with your left hand and press down
– do not touch the throttle trigger or
throttle trigger lockout.
NOTICE
Do not stand or kneel on the drive tube.
N Pull the starter grip slowly with your
right hand until you feel it engage
and then continue pulling it slowly
and steadily. Do not pull out the
starter rope to full length – it might
otherwise break.
N Do not let the starter grip snap back.
Guide it slowly back into the housing
so that the starter rope can rewind
properly.
N Continue cranking until the engine
runs.
4
547BA015 KN
5
547BA016 KN
5
547BA017 KN
547BA018 KN
547BA020 KN