Instruction Manual

FC 56 C
English
26
Have a worn depth wheel replaced by a
servicing dealer. STIHL recommends
that you have servicing and repair work
carried out exclusively by an authorized
STIHL servicing dealer.
Depth Wheel
N The end of the thread on the
screw (1) is peened over to ensure
that the wingnut (2) does not work
loose and be lost.
A very high torque has to be applied to
remove the wingnut from the screw. If
the parts are then reassembled, the
captive function is no longer
guaranteed. In such a case have the
screw and wingnut replaced by a
servicing dealer.
Removing the skirt
N Undo and remove the screw (1).
N Remove the washer (2)
N Pull the skirt (3) out of the
segment (6) and out of the gap (5) in
the deflector
Fitting the skirt
N In order to push the skirt easily into
the gap on the deflector, apply a thin
coating of resin-free oil to the top of
the skirt
N Thread the skirt (3) into the
segment (6) and push into the
gap (5) of the deflector – the bore in
the skirt must be fixed in the
arbor (4)
N Place washer (2) onto screw (1).
N Insert and tighten the screw (1)
Replacing the Depth Wheel
1
239BA023 KN
2
Replacing the Skirt
3
239BA024 KN
1
4
5
6
2
6
4
5
21
239BA025 KN
3