Owner's Manual

37FC 110
English / USA
Definitions
1. Loop handle
For easy control of the machine
while working.
2. Slide control
Starting throttle, run and stop
switch. Keeps the throttle partially
open during starting and switches
the engine's ignition off to stop the
engine.
3. Throttle trigger interlock
Must be depressed before the
throttle trigger can be activated.
4. Throttle trigger
Controls the speed of the engine.
5. Choke lever
Eases engine starting by enriching
the fuel mixture.
Ignition wire.
6. Spark plug boot
Connects the spark plug to the
ignition wire.
7. Air filter cover
Protects the air filter.
8. Fuel tank
For fuel and oil mixture.
9. Machine support
For resting machine on the ground.
10. Fuel filler cap
For closing the fuel tank.
11. Carburetor adjusting screws
For tuning the carburetor.
12. Fuel pump
Provides additional fuel feed for
a cold start.
13. Starter grip
The grip of the pull starter, which is
the device to start the engine.
14. Muffler
(with spark arresting screen)
Attenuates exhaust noises and
diverts exhaust gases away from
the operator. The spark arresting
screen is designed to reduce the
risk of fire.
15. Blade
Metal blade for cutting weeds,
grass, etc.
16. Deflector
Designed to reduce the risk of injury
from foreign objects flung back
towards the operator by the blade
and from contact with the blade.
17. Clamp
Connects the deflector to the drive
tube.
18. Drive tube
Connects the powerhead to the
gearbox.
19. Depth Wheel
Deflector-mounted depth wheel
rolls on ground and keeps edger
blade at preset height for required
depth of cut.
20. Wingnut
Must be loosened to change
position depth wheel.
21. Gearbox Wheel
Gearbox-mounted wheel designed
to protect the gearbox housing from
wear.
22. Gearbox
Reduces engine speed to speed
required to drive the edger blade.
23. Screw Plug
Seals filler opening for gearbox
grease.
24. Wear Guard
Protects the gearbox from wear.
25. Skirt
Designed to reduce the risk of injury
from foreign objects flung back
towards the operator by the blade.