Owner's Manual

33FC 110
English / USA
Checking the Wear Guard
Before every use:
: Check the wear guard (1) for
damage.
: The wear guard must be replaced
as soon as the deflector (2) (arrow)
becomes visible at the latest.
The gearbox may be seriously
damaged if you do not replace the
wear guard in good time.
Replacing the Wear Guard
: Remove the cutting blade – see
chapter “Fitting the Cutting Blade”
: Take out the screws (3).
: Fit the new wear guard (4).
: Insert screws and tighten down
firmly.
: Fit the blade – see chapter “Fitting
the Cutting Blade”.
Fuel pickup body in tank
: Have the pickup body in the fuel
tank replaced every year.
STIHL recommends that maintenance
and repair work be carried out only by
authorized STIHL dealers.
Checking and Replacing
the Wear Guard
2
1
245BA028 KN
3
3
4
245BA029 KN
Inspections and
Maintenance by
Dealer