Owner's Manual

31FC 110
English / USA
Removing the skirt
: Loosen the screw (1) on the
clamp (2) and slide the clamp back
along the drive tube in the direction
of the engine.
: Release screws (3) on arm (4) and
remove together with arm.
: Pull end (5) of skirt out from under
the lip on the deflector.
: Pull the skirt upward until the slot (6)
is visible.
: Use a knife to cut through the skirt,
starting at the slot, and then remove
the skirt.
Fitting the skirt
: Starting from the bottom (a), fit the
skirt in the holder, push it up all the
way and pull it (b) over the edge of
the holder until it slips into position.
Replacing the Skirt
1
2
245BA019 KN
3
4
245BA020 KN
3
245BA021 KN
5
6
245BA033 KN
245BA022 KN
b
245BA023 KN
a