Owner's Manual

20
English / USA
FC 110
Symbol on slide control
: c (7) – stop symbol and arrow. To
stop the engine, move the slide
control in direction of arrow ( h ) to
STOP-O
Starting
: Hold down the throttle trigger
interlock and squeeze the throttle
trigger.
: While holding both levers in this
position.
: Move the slide control to START
and hold it there.
Now release the throttle trigger, slide
control and trigger interlock in that order.
This is the starting throttle position.
: Set the choke knob (8):
For cold start to
g
For warm start to e
even if engine has been running but
is still cold
: Press fuel pump bulb (9) at least five
times – even if the bulb is already
filled with fuel.
: Place the unit on the ground: It must
rest securely on the engine support
and deflector.
Check that the cutting tool is not
touching the ground or any other
obstacles.
: Make sure you have a firm footing.
: Hold the unit with your left hand and
press it down firmly – your thumb
should be under the fan housing.
Do not stand or kneel on the drive
tube!
249BA007 KN
9
8
002BA038 KN002BA040 KN