Operation Manual

 (PDWLF*XLGH%DU
Supports and guides the saw chain.
 2LORPDWLF6DZ&KDLQ
A loop consisting of cutters, tie
straps and drive links.
 %XPSHU6SLNH
Toothed stop for holding saw steady
against wood.
 )URQW+DQG*XDUG
Provides protection against
projecting branches and helps
prevent left hand from
touching the chain if it slips off
the handle bar.
 )URQW+DQGOH
Handle bar for the left hand at
front of saw.
 ,QWHUORFNEXWWRQ
Must be depressed before the
trigger switch can be activated.
 7ULJJHU6ZLWFK
Controls the speed of the motor.
 2LO,QVSHFWLRQ:LQGRZ
For visually checking the oil level.
 5HDU+DQG*XDUG
Gives added protection to
operator’s right hand.
 5HDU+DQGOH
The support handle for the right
hand, located at or toward the
rear of the saw.
 2LO)LOOHU&DS
For closing the oil tank.
 2YHUORDG&LUFXLW%UHDNHU
Interrupts power supply when
exessive infeed force is used or
when chain becomes pinched in
cut. Motor stops.
 6LGH&KDLQ7HQVLRQHU
Permits precise adjustment of chain
tension.
 &KDLQ6SURFNHW
The toothed wheel that drives the
saw chain.
 &KDLQ6SURFNHW&RYHU
Covers the clutch and the sprocket.
 &KDLQ&DWFKHU
Helps to reduce the risk of operator
contact by a chain if it breaks
or comes off the bar.
*XLGH%DU1RVH
The exposed end of the guide bar.
(not illustrated, see chapter
“Mounting the Bar and Chain”).
&KDLQ*XDUG6FDEEDUG
To protect the operator from touching
the chain (not illustrated).
'HILQLWLRQV
( 