Operation Manual

Motor
Rated voltage:
Frequency:
Rating:
Fuse (slow blowing):
Enclosure:
Insulation:
Amp-Rating
Sound pressure level L
p (1 m)
to prEN 50144-2-13
1)
:
Sound power level L
w
to prEN 50144-2-13
1)
:
Vibration
to prEN 50144-2-13
2)
Handle, left:
Handle, right:
1) without load
2)
with load
Chain lubrication:
Oil tank capacity:
Weight without bar and chain
E 220:
120 V
60 Hz
1.8 kW
15 A
IP 20
Type II
15 A
97 dB (A)
110 dB (A)
4.1 m/s
2
12.0 m/s
2
Fully automatic, speed controlled
0.20 l (0.42 US pt)
5.0 kg (11.0 lb)
Cutting Attachment
Recommended cutting attachments
for compliance with § 30 of UL 1662 /
§ 5.12 of ANSI Standard B 175.1-2000
STIHL reduced kickback bar
(with green label): for 3/8" pitch
Rollomatic with sprocket nose
37, 40, 45 or 50 cm (15, 16, 18 or 20 in)
STIHL low kickback chain (with green label):
9.32 mm (3/8") Rapid Micro 2
(33 RM 2, 36 RM 2)
Chain sprocket: 8-tooth for 3/8" pitch
Since new bar/chain combinations may be
developed after publication of this Manual,
ask your STIHL dealer for the latest STIHL
recommendations.
Other cutting attachments available for this
powerhead are:
STIHL yellow-labeled bar:
Rollomatic "S" with sprocket nose
37, 40, 45, or 50 cm (15, 16, 18 or 20 in)
Duromatic with stellite tipped nose
37, 40, 45, or 50 cm (15, 16, 18 or 20 in)
STIHL yellow-labeled chain:
with 3/8" pitch: Rapide-Micro (33/36 RM)
and Rapid-Super (33/36 RS)
In order to comply with the kickback
performance requirements of § 30 of UL
1662 / § 5.12 of ANSI Standard
B 175.1-2000, do not use replacement saw
chain unless it has been designated as
meeting the § 30 of UL 1662/ANSI § 5.12
requirements on this specific powerhead,
or has been designated as "low kickback"
saw chain* in accordance with the
ANSI B 175.1-2000 standard.
* See definition of "low kickback chain"
on page 14 of this Manual.
Specifications
E 220 35