Operation Manual

Please note that the following maintenance intervals apply for normal
operating conditions only. If your daily working time is longer than normal or cutting con-
ditions are difficult (very dusty work area, wood that produces a
lot of pitch, tropical wood etc.), shorten the specified intervals accordingly.
before starting work after finishing work or daily weekly monthly if faulty if damaged as required see page:
Complete machine
Visual inspection (condition, leaks)
x
Clean
x
Switch Check operation
x24
Chain brake, coast down brake
Check operation
x23
Have cleaned by STIHL dealer
x23
Chain oil tank Clean
x
Chain lubrication Check
x25
Saw chain
Inspect, also check sharpness
x29
Check chain tension
x22
Sharpen
x29
Guide bar
Check (wear, damage)
x26
Clean and turn over
xx 26
Deburr
x
Replace
xx27
Chain sprocket Check
x27
Cooling inlets Clean
x28
All accessible screws and nuts Retighten
x
Chain catcher on chain sprocket
cover
Check
x
Replace chain sprocket cover
x
Power cord
Check
x
Have replaced by STIHL dealer
x
0DLQWHQDQFH&KDUW
34 E 220