user manual

MS 171, MS 181, MS 181 C, MS 211, MS 211 C
English
58
Observe the information about ANSI
standard B 175.1-2000 as well as the
definition "low-kickback saw chain" in
the section "Safety Precautions and
Working Techniques".
Rollomatic E guide bars
Saw chains 3/8" P
Chain sprocket
Bar and chain MS 211, MS 211 C
Recommended cutting attachments in
compliance with Sec. 5.11 of ANSI
standard B 175.1-2000
Observe the information about ANSI
standard B 175.1-2000 as well as the
definition "low-kickback saw chain" in
the section "Safety Precautions and
Working Techniques".
Rollomatic E Light guide bars
Rollomatic E guide bars
Saw chains 3/8" P
Chain sprocket
Cutting attachment MS 171, MS 181,
MS 181 C, MS 211, MS 211 C
In order to comply with the kickback
performance requirements of Sec. 5.11
of ANSI standard B 175.1-2000, do not
use replacement saw chains unless they
have been designated as meeting the
ANSI Sec. 5.11 requirements on this
specific powerhead, or have been
designated as "low kickback" saw
chains in accordance with the ANSI B
175.1-2000 standard.
Since new bar/chain combinations may
be developed after publication of this
Manual, ask your STIHL dealer for the
latest STIHL recommendations.
STIHL reduced kickback guide bars
(with green label)
Bar lengths: 12, 14, 16 in.
(30, 35, 40 cm)
Pitch: 3/8" P (9.32 mm)
Groove width: 0.043 in. (1.1 mm)
Sprocket nose: 7-tooth
STIHL reduced kickback saw chain
(with green label)
Picco Micro Mini Comfort 3
(61 PMMC3)
Pitch: 3/8" P (9.32 mm)
Drive link gauge: 0.043 in. (1.1 mm)
Spur chain sprocket or rim sprocket
6-tooth for 3/8" P
STIHL reduced kickback guide bars
(with green label)
Bar lengths: 14 in. (35 cm)
Pitch: 3/8" P (9.32 mm)
Groove width: 0.050 in. (1.3 mm)
Sprocket nose: 9-tooth
STIHL reduced kickback guide bars
(with green label)
Bar lengths: 12, 14, 16 in.
(30, 35, 40 cm)
Pitch: 3/8" P (9.32 mm)
Groove width: 0.050 in. (1.3 mm)
Sprocket nose: 9-tooth
STIHL reduced kickback saw chain
(with green label)
Picco Micro Comfort 3 (63 PMC3)
Picco Super 3 (63 PS3)
Pitch: 3/8" P (9.32 mm)
Drive link gauge: 0.050 in. (1.3 mm)
Spur chain sprocket or rim sprocket
6-tooth for 3/8" P
7-tooth for 3/8" P