Instruction Manual

BR 350, BR 430
English
13
Screw-type tank cap
Opening the bayonet-type fuel cap
WARNING
Never use a tool to open the bayonet-
type fuel cap. This may damage the cap
and cause fuel leakage.
N Press the bayonet-type fuel cap
down as far as stop, turn it
counterclockwise (about 1/8 turn)
and remove.
Filling up with fuel
Take care not to spill fuel while fueling
and do not overfill the tank. STIHL
recommends you use the STIHL filler
nozzle for fuel (special accessory).
Closing the bayonet-type fuel cap
N Place the cap on the tank opening
and turn it until it slips into position.
N Press the fuel cap down by hand as
far as stop and turn it clockwise
(about 1/8 turn) until it engages.
Opening screw-type tank cap
N Turn the cap counterclockwise until
it can be removed from the tank
opening.
N Remove the cap.
Filling up with fuel
Take care not to spill fuel while fueling
and do not overfill the tank. STIHL
recommends you use the STIHL filler
nozzle (special accessory).
Closing screw-type tank cap
N Place the cap in the opening.
N Turn the cap clockwise as far as
stop and tighten it down as firmly as
possible by hand.
0002BA092 KN
0002BA014 KN
2.
1.
0002BA015 KN
2.
1.
002BA447 KN
002BA448 KN