Owner's Manual

BR 200
English
13
Refueling
Take care not to spill fuel while fueling
and do not overfill the tank. STIHL
recommends use of the STIHL filling
system (special accessory).
Closing the threaded filler cap
N Position cap.
N Turn the cap clockwise as far as it
will go and tighten it as securely as
possible by hand.
Functions of setting lever
Run position F
Engine runs or is ready to start. Throttle
trigger (2) can be moved to any position.
Switch off engine †
Ignition is interrupted, engine stops. The
setting lever (1) is not locked in this
position. It springs back to the run
position F. The ignition is switched on
again.
Fixed throttle
The throttle trigger (2) can be locked in
any position by operating the setting
lever (1).
To disengage the lock:
N Return the setting lever (1) to the
run position F.
002BA448 KN
Information Before You
Start
With the engine stopped and
before starting, check the air
intakes between the backplate
and powerhead for blockages and
clean if necessary.
2
1
0009BA009 KN
2
1
0009BA010 KN