Owner's Manual

BGA 85
English
15
N Unlock the power tool by moving the
retaining latch (2) to ‚.
N Push down the trigger switch
lockout (3) and depress the trigger
switch (4) and hold them in that
position.
The motor runs only if the retaining
latch (2) is on
‚ and the trigger switch
lockout (3) and trigger switch (4) are
operated simultaneously.
Trigger switch
Motor speed can be controlled with the
trigger switch. Depress the trigger switch
to accelerate the motor.
N Release the trigger switch
lockout (1) and the trigger
switch (2).
N Move the retaining latch (3) to ƒ –
the trigger switch (2) cannot be
operated – the power tool is locked
to prevent start-up.
Always remove the battery from the
power tool during work breaks and after
finishing work.
2
9927BA004 KN
4
3
2
9927BA005 KN
9927BA012 KN
Switching Off
2
1
9927BA006 KN
3
9927BA007 KN
2