Instruction Manual
Table Of Contents
- 1 Vorwort
- 2 Informationen zu dieser Gebrauchsanleitung
- 3 Übersicht
- 4 Sicherheitshinweise
- 5 Blasgerät einsatzbereit machen
- 6 Akku laden und LEDs
- 7 Blasgerät zusammenbauen
- 8 Akku einsetzen und herausnehmen
- 9 Blasgerät einschalten und ausschalten
- 10 Blasgerät und Akku prüfen
- 11 Mit dem Blasgerät arbeiten
- 12 Nach dem Arbeiten
- 13 Transportieren
- 14 Aufbewahren
- 15 Reinigen
- 16 Warten und Reparieren
- 17 Störungen beheben
- 18 Technische Daten
- 19 Ersatzteile und Zubehör
- 20 Entsorgen
- 21 EU-Konformitätserklärung
- 22 Anschriften
- 1 Introduction
- 2 Guide to Using this Manual
- 3 Overview
- 4 Safety Precautions
- 5 Preparing the Blower for Operation
- 6 Charging the Battery, LEDs
- 7 Assembling the Blower
- 8 Removing and Fitting the Battery
- 9 Switching the Blower On/Off
- 10 Testing the Blower and Battery
- 11 Operating the Blower
- 12 After Finishing Work
- 13 Transporting
- 14 Storing
- 15 Cleaning
- 16 Maintenance and Repairs
- 17 Troubleshooting
- 18 Specifications
- 19 Spare Parts and Accessories
- 20 Disposal
- 21 EC Declaration of Conformity
- 1 Préface
- 2 Informations concernant la présente Notice d'emploi
- 3 Vue d'ensemble
- 4 Prescriptions de sécurité
- 4.1 Symboles d'avertissement
- 4.2 Utilisation conforme à la destination prévue
- 4.3 Exigences posées à l'utilisateur
- 4.4 Vêtements et équipement
- 4.5 Aire de travail et voisinage
- 4.6 Bon état pour une utilisation en toute sécurité
- 4.7 Utilisation
- 4.8 Transport
- 4.9 Rangement
- 4.10 Nettoyage, maintenance et réparation
- 5 Préparatifs avant l'utilisation du souffleur
- 6 Recharge de la batterie et DEL
- 7 Assemblage du souffleur
- 8 Introduction et extraction de la batterie
- 9 Mise en marche et arrêt du souffleur
- 10 Contrôle du souffleur et de la batterie
- 11 Travail avec le souffleur
- 12 Après le travail
- 13 Transport
- 14 Rangement
- 15 Nettoyage
- 16 Maintenance et réparation
- 17 Dépannage
- 18 Caractéristiques techniques
- 19 Pièces de rechange et accessoires
- 20 Mise au rebut
- 21 Déclaration de conformité UE
- 1 Premessa
- 2 Informazioni sulle presenti Istruzioni d’uso
- 3 Sommario
- 4 Avvertenze di sicurezza
- 5 Preparare il soffiatore per l'esercizio
- 6 Carica della batteria e LED
- 7 Assemblaggio del soffiatore
- 8 Inserire e togliere la batteria
- 9 Accendere e spegnere il soffiatore
- 10 Controllo di soffiatore e batteria
- 11 Lavorare con il soffiatore
- 12 Dopo il lavoro
- 13 Trasporto
- 14 Conservazione
- 15 Pulizia
- 16 Manutenzione e riparazione
- 17 Eliminazione dei guasti
- 18 Dati tecnici
- 19 Ricambi e accessori
- 20 Smaltimento
- 21 Dichiarazione di conformità UE
- 1 Voorwoord
- 2 Informatie met betrekking tot deze handleiding
- 3 Overzicht
- 4 Veiligheidsinstructies
- 5 Bladblazer inzetgereed maken
- 6 Accu laden en leds
- 7 Bladblazer completeren
- 8 Accu aanbrengen en wegnemen
- 9 Bladblazer inschakelen en uitschakelen
- 10 Bladblazer en accu controleren
- 11 Werken met de bladblazer
- 12 Na de werkzaamheden
- 13 Vervoeren
- 14 Opslaan
- 15 Reinigen
- 16 Onderhoud en reparatie
- 17 Storingen opheffen
- 18 Technische gegevens
- 19 Onderdelen en toebehoren
- 20 Milieuverantwoord afvoeren
- 21 EU-conformiteitsverklaring
0458-286-9621-A
32
English
10 Testing the Blower and Battery
9.2 Switching Off the Blower
► Release trigger switch and trigger switch lockout.
Air stops flowing out of the nozzle.
► If air continues to flow out of the nozzle: remove the
battery and consult a STIHL servicing dealer.
There is a fault in the blower.
► Move retaining latch to the position.
10.1 Checking the Controls
Retaining latch, trigger switch lockout and trigger switch
► Remove the battery.
► Move retaining latch to the position.
► Try squeezing the trigger switch without depressing the
trigger switch lockout.
► If the trigger switch can be squeezed: Do not use the
blower. Consult a STIHL servicing dealer.
There is a fault in the retaining latch or the trigger switch
lockout.
► Move retaining latch to the position.
► Depress and hold the trigger switch lockout.
► Squeeze the trigger switch.
► Release trigger switch and trigger switch lockout.
► If the trigger switch or the trigger switch lockout is stiff or
does not spring back to its initial position: Do not use the
blower. Consult a STIHL servicing dealer.
There is a fault in the trigger switch or the trigger switch
lockout.
Switch on blower.
► Insert battery.
► Depress and hold the trigger switch lockout.
► Squeeze and hold the trigger switch.
Air flows out of the nozzle.
► If 3 LEDs flash red: Remove the battery and consult a
STIHL servicing dealer.
There is a fault in the blower.
► Release trigger switch.
Air stops flowing out of the nozzle.
► If air continues to flow out of the nozzle: Remove the
battery and consult a STIHL servicing dealer.
There is a fault in the blower.
10.2 Testing the Battery
► Press button on battery.
The LEDs glow or flash.
► If the LEDs do not glow or flash: Do not use the battery
and contact your STIHL servicing dealer.
There is a malfunction in the battery.
11.1 Holding and Guiding the Blower
► Hold and guide the blower by the control handle with one
hand, wrapping your thumb around the control handle.
10 Testing the Blower and Battery
11 Operating the Blower
0000-GXX-4495-A0