Instruction Manual

6 Displaying the Charge
State and LEDs
6.1 Displaying the Charge State
1
20-40%
40-60%
60-80%
80-100%
0-20%
► Press button (1).
The LEDs illuminate green for approx. 5 sec‐
onds to indicate the charge state.
► If the right LED flashes green: charge the bat‐
tery.
6.2
LEDs on Battery
The LEDs can show the state of charge or mal‐
functions. The LEDs can glow or flash green or
red.
The state of charge is indicated when the LEDs
glow or flash green.
► If the LEDs glow or flash red: Troubleshooting,
14.
There is a malfunction in the cordless product
or battery.
7 Inserting and Removing
the Double-battery Com‐
partment
7.1
Inserting the Double-battery
Compartment
A battery must be inserted in battery compart‐
ment 1; battery compartment 2 can remain
empty if necessary.
►
Switch off the cordless product.
► Insert double-battery compartment (1).
► Push battery (2) into battery compartment (3)
as far as it will go.
Battery (2) engages with a click.
►
Connect the double-battery compartment as
described in the instruction manual for the
cordless product.
7.2
Removing the Double-battery
Compartment
► Switch off the cordless product.
► Disconnect the double-battery compartment
as described in the instruction manual for the
cordless product.
► Press locking lever (1).
Battery (2) is released and can be removed.
► Press locking lever (1).
Double-battery compartment (2) is released
and can be removed.
8 Testing the Battery
8.1 Testing the Battery
► Press button on battery.
The LEDs glow or flash.
► If the LEDs do not glow or flash: Do not use
the battery and contact your STIHL servicing
dealer.
There is a malfunction in the battery.
9 After Finishing Work
9.1 After Finishing Work
►
Switch off the cordless product.
► Remove the battery.
6 Displaying the Charge State and LEDs English
0478-909-9930-B.VA4.M20. 15