Operation Manual

•
Remove four screws -
•
push the hand guard upward -
•
pull underside of fan housing away
from crankcase
and remove it downward
•
Use a screwdriver to pry the rope
out of the starter grip.
•
Remove remaining rope from the
rotor and starter grip.
138BA017 L
Ä
5HSODFLQJ6WDUWHU5RSHDQG
5HZLQG6SULQJ
001BA002 KN
1
2
3
3
000BA036 TR
1
•
Fit a new spark plug after
approx. 100 operating hours -
or earlier if the electrodes are
badly eroded.
:DUQLQJ
To reduce the risk of fire and burn injury,
use only spark plugs authorized by
STIHL (see “Specifications”). Always
press spark plug boot  snugly onto
spark plug terminal  of the proper
size. (Note: If terminal has detachable
SAE adapter nut, it must be attached.)
A loose connection between spark plug
terminal and ignition wire connector in
the boot may create arcing that could
ignite combustible fumes and cause a
fire.
 