Product Warranty

6. MAKING FINAL ADJUSTMENTS
5. SETTING TABLE UPRIGHT
15.15.
15.15.
15.
Before lifting table, be sure both top halves areBefore lifting table, be sure both top halves are
Before lifting table, be sure both top halves areBefore lifting table, be sure both top halves are
Before lifting table, be sure both top halves are
locked in safety latches! Be sure casters are locked!locked in safety latches! Be sure casters are locked!
locked in safety latches! Be sure casters are locked!locked in safety latches! Be sure casters are locked!
locked in safety latches! Be sure casters are locked!
Put a 7 inch stack of magazines, wood, etc. under caster
beam nearest the floor to protect casters. (See Detail
KK
KK
K).
16.16.
16.16.
16.
With the help of one other adult,With the help of one other adult,
With the help of one other adult,With the help of one other adult,
With the help of one other adult, brace lower caster
beam with your foot and lift table upright. (See Detail
LL
LL
L).
17.17.
17.17.
17.Once upright, release safety latch and lower table top
halves. (See Detail
M M
M M
M and
OPERATING INSTRUCTIONSOPERATING INSTRUCTIONS
OPERATING INSTRUCTIONSOPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS
on next page).
At least two adults are needed to complete the followingAt least two adults are needed to complete the following
At least two adults are needed to complete the followingAt least two adults are needed to complete the following
At least two adults are needed to complete the following
steps. Be sure top halves are locked in safety latches! Be suresteps. Be sure top halves are locked in safety latches! Be sure
steps. Be sure top halves are locked in safety latches! Be suresteps. Be sure top halves are locked in safety latches! Be sure
steps. Be sure top halves are locked in safety latches! Be sure
that both locking casters are locked!that both locking casters are locked!
that both locking casters are locked!that both locking casters are locked!
that both locking casters are locked!
You must use a 7" stack of magazines (or similar block) toYou must use a 7" stack of magazines (or similar block) to
You must use a 7" stack of magazines (or similar block) toYou must use a 7" stack of magazines (or similar block) to
You must use a 7" stack of magazines (or similar block) to
protect the casters when lifting table upright!protect the casters when lifting table upright!
protect the casters when lifting table upright!protect the casters when lifting table upright!
protect the casters when lifting table upright!
CAUTION
18.18.
18.18.
18.Loosen the six bolts shown
below and adjust table so
that the space between the
two table top halves
measures 5/16 of an inch.
19.19.
19.19.
19.Retighten these bolts.
20.20.
20.20.
20.Check over entire assembly
to be sure all nuts and bolts
are secure.
Remember, doRemember, do
Remember, doRemember, do
Remember, do
not overtighten bolts atnot overtighten bolts at
not overtighten bolts atnot overtighten bolts at
not overtighten bolts at
joints that move.joints that move.
joints that move.joints that move.
joints that move.
6
If your gap between table halves is greater than 5/16" or uneven adjust it as follows.If your gap between table halves is greater than 5/16" or uneven adjust it as follows.
If your gap between table halves is greater than 5/16" or uneven adjust it as follows.If your gap between table halves is greater than 5/16" or uneven adjust it as follows.
If your gap between table halves is greater than 5/16" or uneven adjust it as follows.