Operation Manual
8
WARNING!
-
onds for the cutting device to stop.
4. OPERATING MODES AND WORK
TECHNIQUES
-
rials after cutting.
and provisions for the disposal of oils, petrol,
WARNING! Always wear suitable cloth-
ing when using the machine. Your dealer can
provide you with all the information on the
most suitable accident-prevention devices to
guarantee your safety.
4.1 MACHINE OPERATING MODES
WARNING!
must always be firmly held in both hands,
body and the cutting group below the line of
the belt.
-
-
WARNING! The use of metal or rigid
blades of any type with this machine is pro-
hibited.
WARNING! Use ONLY nylon lines. The
use of metal lines, plasticised metal lines
and/or lines not suitable for the head can
During use it is advisable to stop the engine pe-
the guard.
WARNING! Do not use the machine for
sweeping, tilting the cutting line head. The
small stones 15 metres or more, causing
cutting line head during the operation.
-
For heavier cutting it can be useful to tilt the cut-
WARNING!
be thrown, which could harm people, animals
or cause damage.
-
er part of the cutting line head does not touch
the ground and the cutting line is at the required
-
-
-