Operation Manual

Edition Chapter Refers to model Page Chapter
2000-03-31 15
Workshop Manual Stiga Park
5. Carefully dismantle the left bearing in
the support with a screwdriver.
6. Remove the lifting fork from the bracket.
Assembly of lifting fork
Assemble in reverse order.
Check that the hole in the steering-column
is fully inline with the length of the machine
before the steering chain is put on. Use the
mark made before dismantling to centre the
chain more easily.
Follow-up work
• Dismantling of lifting lock, Pro 20,
see chapter 3.1.3.
• Adjusting of steering chain, see chapter
4.2.
Replacement of lifting
fork
Pro 20 3.1.4