Operation Manual

8
EN
7. TROUBLESHOOTING
Problem  Solution

the auto-feed head.
 
Not enough string on spool.
Install more string, refer to string
replacement earlier in this manual


release button.
String is tangled on spool.
Remove string from spool and

earlier in this manual

and string heaD
Cutting tall grass at ground level



trigger is depressed.
Battery is not secure.
To secure the battery pack, make
sure the latch on bottom of the
battery pack snaps into place.
Battery is not charged.
Charger the battery pack according

you model
Shaft not connected completely.

seated in shaft coupler on upper
shaft and secure shaft coupler.
TROUBLESHOOTING