Operation Manual

4
EN
SERVICE

       
technician.

nearest AUTHORISED SERVICE CENTRE for repair.
When servicing, use only identical replacement parts.
WARNING





We recommend Wide Vision Safety Mask for use



3. TECHNICAL DATA
Voltage 43.2 Volt DC
No load speed 6500/min Max
Cutting head Bump feed/Brush0cutter Blade
Cutting Line Diameter 2.0mm
Cutting Path Diameter 356mm/254mm
Features of bump feed/Brush- cutter Blade
Max speed 10000rpm/4 teeth/
max speed 1000rpm
 Max 6.4kg

Measuered sound pressure level L
PA=81 dB(A), KPA=3 dB(A)
 LWA=93.5 dB(A), KPA=3 dB(A)
 L
WA=96 dB(A)
Vibration 4.0m/s
2
,k=1.5m/s
2
Brush Cutter
Measuered sound pressure level L
PA=82 dB(A), KPA=3 dB(A)
 L
WA=95.2 dB(A), KPA=3 dB(A)
 L
WA=100 dB(A)
Vibration 3.0m/s
2
, k=1.5m/s
2
4. DESCRIPTION
1. Battery pack
3. Rear handle


9.Front handle
11.Grass deflector
13.Blade
2. Battery charger
4.Lock-off button

8. Lock latch
10.Couple
12.Trimmer head
14. Cut-off Blade
15. EC Conformity marking
16. Name and address of the manufacturer

EC
18. Article Code
19. Machine model
20. Serial number
21. Year of manufacture
SPECIFICATIONS/DESCRIPTION
The example of the conformity declaration is found in the penultimate page of the manual.
ANNEX E ANNEX D
NOTE: THE DECLARED VIBRATION TOTAL VALUE HAS BEEN MEASURED IN ACCORDANCE WITH A STANDARD
TEST METHOD AND MAY BE USED FOR COMPARING ONE TOOL WITH ANOTHER; THE DECLARED VIBRATION
TOTAL VALUE MAY ALSO BE USED IN A PRELIMINARY ASSESSMENT OF EXPOSURE.
WARNING:
THE VIBRATION EMISSION DURING ACTUAL USE OF THE POWER TOOL CAN DIFFER FROM THE DECLARED
TOTAL VALUE DEPENDING ON THE WAYS IN WHICH THE TOOL IS USED; AVOID VIBRATION RISK SUGGESTION:
WEAR GLOVE DURING OPERATION LIMIT OPERATING TIME AND SHORTEN TRIGGER TIME.