Operation Manual

EN
1) Warning! Danger. The failure to use this ma-
chi ne correctly can be hazardous for oneself and
others.
2) Read the instruction manual before using the
ma chine.
3) If you are using the machine every day in nor-
mal conditions, you can be exposed to a noise
le vel of 85 dB (A) or higher. Wear ear protectors,
safety goggles and a protective helmet.
4) Wear gloves and protective footwear!
5) Danger of ying objects! Keep any people or
pets at least 15 m away when using the machine!
11) Fuel tank
12) Engine stop switch
positions
a = stop
b = run
c = start
13) Choke
14) Primer
6) Maximum cutting device speed. Only use sui-
table cutting devices.
7) Do not use the circular saw blade. Danger:
Using the circular saw blade with machines
marked with this symbol exposes the user
to the danger of very serious or even fatal
injuries.
8) Warning! Petrol is ammable. Allow engine to
cool at least 2 minutes before refuelling.
9) Warning! Keep away from hot surfaces.
10) Beware of blade thrust.
SYMBOLS 103
EXPLANATORY SYMBOLS
ON THE MACHINE (if present)
2. SYMBOLS
21) Cutting device
with adequate
protection
22) Cutting device
rotation direction
EXPLANATORY SYMBOLS
ON THE PROTECTION DEVICES (if present)