Operation Manual

13 MAINTENANCE SUMMARY TABLE
Intervention Frequency
service hours/calendar months
ref. /
Ref.
Fig.
First time Then every
MACHINE
Check all fasteners - Before each use -
Safety checks/check controls - Before each use -
Check tyre pressure - Before each use -
General cleaning and inspection - At the end of each use -
General lubrication - 50 hours and after each
wash
9.12
Check the drive belts for wear 5 hours 50 hours 9.8
Check/correct steering 5 hours 100 hours 9.9
Battery charging - Before putting into storage
For machines with an electric
starter: carry out a top-up
charge every four months.
9.10
Cleaning the battery terminals - When there is oxidization. 9.10.4
ENGINES/TRANSMISSION (general)
Check / Top up engine oil - Before each use 9.5.1
Replacing / Filling the engine oil 5 hours 50 hours / 12 months 9.5.2
Filter replacement - 100 hours 9.5.3
Replace fuel lter 5 hours 50 hours / 12 months 9.6
Replacing the spark plugs - 200 hours 9.11.3
Cleaning the air intake - 50 hours 9.11.4
Engine mod. B&S Power Built
Clean/replace the paper air lter - 100 hours 9.11.1
(1)
Engine mod. B&S Intek
Clean/replace the foam air pre-lter - 25 hours 9.11.2
(1)
Clean/replace the paper air lter - 100 hours 9.11.2
(1)
(1) Clean more frequently when operating in particularly demanding conditions or when there is debris
in the air.
EN
ENGLISH
(Translation of the Original Instructions)
24