Operation Manual

9
EN
ENGLISH
(Translation of the Original Instructions)
Do not change the engine governor set-
tings or overspeed the engine.
 
get hot during use. Burns hazard.
Disengage the cutting means or the
PTO, set the engine to the idle position,
stop the engine and remove the key
(make sure that all moving parts have
come to a complete stop):
a. whenever you leave the machine
unattended or leave the driver’r seat.
b. before removing the jamming cause
or unclogging the collector channel;
c. before checking, cleaning or working
on machine;
d. after striking a foreign object. Inspect
the machine for damage and make
repairs before restarting and opera-
ting the machine;
Disengage the cutting means or the
PTO and stop the engine (make sure
that all moving parts have come to a
complete stop):
a. Before refuelling;
b. Every time you remove the grass col-
lector sack or put it back on;
c. adjusting the cutting height, assuming
this operation cannot be done from
the driver’s seat.
Disengage the cutting means or the
  
machine is not being used.
Reduce the throttle setting before stop-

-
structions in the manual.
   
as one rotating cutting mean may cau-
se other cutting means to rotate.
WARNING - In the event of failures or
     -
chine, stop the engine immediately
      
causing further damage; in the event of



the situation and contact a health care
facility for the necessary treatment. Ca-


animals if ignored.
CAUTION! The noise and vibration le-
     
-
chine. The use of an unbalanced cutting
-
ment, or the absence of maintenance
     
emissions and vibrations. Consequen-
tly, it is necessary to take preventive
steps to eliminate possible damage
due to high levels of noise and stress
from vibration. Maintain the machine
 

3.4 MAINTENANCE AND STORAGE
CAUTION! - Before cleaning or doing

key and read the relevant instructions.
-

 


never repaired. Only use original spa-
re parts: The use or non-original and/
   -
mise the safety of the machine, may
    

circumstance liable or responsible.
Any regulations and maintenance ope-
rations not described herein must be
carried out by your Dealer or Authori-
-
    
-
rectly, maintaining the correct degree of
safety and the original operating condi-

or maintenance operations carried out
by people not having the necessary

-
bility.
• After each use of the machine, remove the key
and check for any damage.
• Keep all nuts, bolts and screws tight to be sure
the equipment is in safe working condition.