Instruction Manual

1
10
11
1413
12
Footer:
Mount the end cap and connection tube
+ :
Spray the screw-in connection and cogging of the supporting bracket with e.g. WD 40.
10 11
Screw upper casing to the supporting bracket.
Collector casing:
15
15
» Recommendation:
The casing may be mounted to the
supporting bracket even before inserting
the tubes, as the tube is lockable
by itself.
13
Installation instructions • SP-20 • SP-30
Stiebel Eltron, Inc. 17 West Street West Hatfield, MA 01088
Telephone: [phone] | Fax: [phone] | [e-mail] | www.stiebel-eltron-usa.com
Simply the Best