Operating Instructions and Installation Instructions
30 |DHE SLi www.stiebel-eltron.com
INSTALLATION
Installation
10. Installation
This chapter describes installation in accordance with the factory
settings.
For further installation options, see chapter "Installation alter-
natives".
26�02�02�0543
Open the appliance.
26�02�02�1101
Remove the back panel by pressing the two locking hooks
and pulling the lower part of the back panel towards the
front.
26�02�02�0810�
Mark out the holes for drilling with the installation template.
If the appliance is to be installed with water connections for
finished walls, also mark out the fixing hole in the lower part
of the template.
Drill the holes and secure the mounting bracket with
2screws and 2rawl plugs (screws and rawl plugs are not
part of the standard delivery).
Note
If you are installing the appliance with flexible water con-
nections, secure the back panel with a screw.
Fit the mounting bracket.
160
30
1
26�02�02�0824�
1 Installation aid
Prepare the power cable.
Making the water connection
!
Material damage
Carry out all water connection and installation work in
accordance with regulations.
12
D0000053319
Seal and insert the twin connectors.
26�02�02�1307�
1
4
5
2
3
2
1 DHW with tee
2 Gasket
3 Cold water with cross-piece
4 Strainer
5 Profile washer
Fit the water connections.
!
Material damage
The strainer must be fitted for the appliance to function.
When replacing the appliance, check that the strain-
er is present.