Operating Instructions and Installation Instructions

ENGLISH
www.stiebel-eltron.com DHB-E SLi | 21
CONTENTS | SPECIAL INFORMATION
SPECIAL INFORMATION
OPERATION
1. General information ��������������������������������������� 22
1.1 Safety instructions ����������������������������������������������22
1.2 Other symbols in this documentation ���������������������� 22
1.3 Units of measurement �����������������������������������������22
2. Safety �������������������������������������������������������� 22
2.1 Intended use �����������������������������������������������������22
2.2 General safety instructions ����������������������������������� 22
2.3 Test symbols �����������������������������������������������������23
3. Appliance description ������������������������������������� 23
4. Operation ��������������������������������������������������� 23
4.1 Recommended settings ���������������������������������������23
4.2 Temperature limit / Anti-scalding protection ������������� 23
5. Cleaning, care and maintenance ������������������������� 24
6. Troubleshooting �������������������������������������������� 24
INSTALLATION
7. Safety �������������������������������������������������������� 25
7.1 General safety instructions ����������������������������������� 25
7.2 Instructions, standards and regulations �������������������25
8. Appliance description ������������������������������������� 25
8.1 Standard delivery �����������������������������������������������25
8.2 Accessories ������������������������������������������������������� 25
9. Preparations ������������������������������������������������ 26
9.1 Installation site �������������������������������������������������� 26
9.2 Water installation ����������������������������������������������� 26
9.3 Appliance with adjustable connected load ���������������� 27
10. Installation �������������������������������������������������� 27
10.1 Standard installation ������������������������������������������� 27
10.2 Completing the installation ����������������������������������� 29
11. Commissioning ��������������������������������������������� 29
11.1 Initial start-up ��������������������������������������������������� 29
11.2 Recommissioning ����������������������������������������������� 30
12. Shutdown ��������������������������������������������������� 30
13. Installation options ���������������������������������������� 30
13.1 Electrical connection from above on unfinished walls �� 30
13.2 Electrical connection on finished walls ��������������������30
13.3 Large conductor cross-section for electrical
connection from below ���������������������������������������� 30
13.4 Connecting a load shedding relay ��������������������������� 31
13.5 Water installation on finished walls ������������������������ 31
13.6 Water installation on finished walls with solder/
compression fitting ��������������������������������������������� 31
13.7 Water installation on finished walls; fitting the
appliance cover ������������������������������������������������� 31
13.8 Fitting the base part of the back panel with threaded
fittings on finished walls ��������������������������������������32
13.9 Wall mounting bracket when replacing an appliance ���32
13.10 Installation with offset tiles ����������������������������������� 32
13.11 Pivoting appliance cover �������������������������������������� 32
13.12 Temperature limit / Anti-scalding protection ������������� 33
SPECIAL INFORMATION
- The appliance may be used by children aged 8
and older and persons with reduced physical,
sensory or mental capabilities or a lack of ex-
perience and know-how, provided that they are
supervised or they have been instructed on how
to use the appliance safely and have understood
the resulting risks. Children must never play with
the appliance. Children must never clean the ap-
pliance or perform user maintenance unless they
are supervised.
- Risk of burns: The tap can reach temperatures in
excess of 60°C.
- Ensure the appliance can be separated from the
power supply by an isolator that disconnects all
poles with at least 3mm contact separation.
- Secure the appliance as described in chapter "In-
stallation/ Installation".
- Observe the maximum permissible pressure (see
chapter "Installation/ Specification/ Data table").
- Drain the appliance as described in chapter "In-
stallation/ Maintenance/ Draining the appliance".
14. Troubleshooting �������������������������������������������� 34
15. Maintenance ������������������������������������������������ 35
16. Specification ������������������������������������������������ 35
16.1 Dimensions and connections ��������������������������������� 35
16.2 Wiring diagram ������������������������������������������������� 35
16.3 DHW output ������������������������������������������������������ 36
16.4 Application areas/ conversion table ����������������������� 36
16.5 Pressure drop ��������������������������������������������������� 36
16.6 Fault conditions �������������������������������������������������36
16.7 Country-specific approvals and certifications: Germany 37
16.8 Details on energy consumption ������������������������������ 37
16.9 Data table �������������������������������������������������������� 38
GUARANTEE
ENVIRONMENT AND RECYCLING