Install Instructions
ENGLISH
WWW.STIEBEL-ELTRON-USA.COM GALAXY
™
AUTOMATIC HAND DRYERS | 13
SPECIFICATION
11.2 Technical data
Galaxy
™
1 Galaxy
™
M1
Part number 073009 073724
Electrical data
Phase 60/50 Hz - single
Voltage 120 V
Wattage 1850 W 1850 W
Amperage 15.42 A 15.42 A
Required circuit breaker
1
20 A
Required wire size
2
12 AWG
Other
Height 9
13
/16
(250 mm) 10 ½
(266 mm)
Width 6
7
/8
(175 mm)
Depth 9
1
/16
(230 mm)
Weight 5.5 lb (2.5 kg) 8.8 lb (4.0 kg)
Color Alpine white Alpine white, charcoal gray, silver
Housing ABS polycarbonate Cast aluminum
Sound level 53 dB(A) 53 dB(A)
Air volume 90.0 cfm
Drying time 30 seconds
Galaxy
™
2 Galaxy
™
M2
Part number 073010 073725
Electrical data
Phase 60/50 Hz - single
Voltage 240 V 208 V 240 V 208 V
Wattage 2000 W 1500 W 2000 W 1500 W
Amperage 8.34 A 7.21 A 8.34 A 7.21 A
Required circuit breaker
1
15 A 15 A
Required wire size
2
12 AWG
Other
Height 9
13
/16
(250 mm) 10 ½
(266 mm)
Width 6
7
/8
(175 mm)
Depth 9
1
/16
(230 mm)
Weight 5.5 lb (2.5 kg) 8.8 lb (4.0 kg)
Color Alpine white Alpine white, charcoal gray, silver
Housing ABS polycarbonate Cast aluminum
Sound level 53 dB(A) 53 dB(A)
Air volume 95.0 cfm
Drying time 30 seconds
1
This is our recommendation for overcurrent protection sized at 100% of load.
Check local codes for compliance if necessary.
2
Copper must be used. Conductors should be sized to maintain a voltage drop of less than 3%
under load.