MSDS

6-Accidental Release Measures
Steps to be taken in case of spill or leak: Flood with water to polymerize. Soak up with inert absorbent.
7- Handling and Storage:
Safe storage:
Handling:
8- Protective Equipment:
Ventilation:
Respiratory protection:
Skin:
Eye protection:
Store away from heat and direct sunlight to maximize shelf life. Store inside in a dry
location.
Keep container tightly closed. Avoid contact with skin. Avoid breathing vapors.
Local exhaust ventilation is recommended to maintain vapor level below TLV.
Not applicable with good local exhaust.
Polyethylene or non-reactive gloves. Do not use cotton or wool. See supplemental
page for more information.
Safety glasses or goggles with side shields.
9- Physical and Chemical Properties:
Appearance: Clear liquid
Odor: Sharp, pungent
Boiling Point: Greater than 300F
Vapor Pressure: Less than .2mmHg @20C
Vapor Density: Approximately 3 (Air =1)
Evaporation rate: Not applicable
Specific Gravity: 1.06
Solubility in water: Negligible. Polymerized by water.
10- Stability and Reactivity
Stability: Stable
Hazardous Polymerization: Will not occur
Incompatibility: Polymerized by contact with water, alcohols, amines, and alkalis.
11- Toxicological Information
See Section 3
M S D S SJSG
Page 2 of 4