Installation Guide

FAQ’s
Q: My wall gets extremely cold in the winter. Can I still use “Stick-It tiles” on these walls?
A: Yes with some additional adhesive to secure the bond between the tile and the cold walls.
Inside/interior walls should not be impacted.
The spray adhesive can be applied to the back of the tile directly (after removing the paper
backing) or spray directly onto the wall and apply the tile onto the area that was sprayed.
Apply pressure as directed.
Q: The week after putting up “Stick-It” tiles, the edges connecting one tile to another are
separating. Help!
A: Should the tiles be separating from each other, do the following:
•Peel the tile pack an additional inch.
•Apply a conservative amount of glue with a small applicator to the exposed area.
•Using pressure reapply to adjacent tile
•Super Glue, Gorilla Glue or strong spray adhesive (3M77) works fine. Remember to wear
protective gloves!