Installation Guide

FAQ’s
Q: I put up my “Stick-It” tiles but did not apply the caulking around the border. Should I?
A: Should the tiles be placed near a high moisture area (behind sink, around tub etc) it is
recommended to create a vapour barrier, not allowing moisture to seep behind the tile and
impact the adhesive.
Adding caulking to the project will also give it a more finished/authentic look.
Q: I don’t have the steadiest hands in the world, and it take a few tries to get the tiles on straight
or the overlap perfect. Will this impact the quality of the tiles? If so, what do I do?
A: Once the tile is placed the adhesive will start to set immediately. If you are peeling the tile
off the wall to straighten it, or if your overlaps are not perfect, additional adhesive will be
required to secure the tile to the wall. This is why it is best to go very slowly, or be ready to
apply a secondary adhesive. The finished look however, will be perfect.