User guide

ManualsBrandsSTI ManualsSafetyWS109

Model STI-WS109

Outdoor Bell Box

Kit Contents

(1) Outdoor Bell Box

(2) Keys for ON/OFF switch

(5) Screws and wall plugs

(1) Instruction leaﬂet

Needed (not included)

9V 500mA center + power supply

(4) “C” alkaline batteries

For use with Wire-Free Home Protection System

We protect the things that protect you.

Summary of content (4 pages)

PAGE 1
Outdoor Bell Box Model STI-WS109 For use with Wire-Free Home Protection System Kit Contents Needed (not included) (1) Outdoor Bell Box (2) Keys for ON/OFF switch (5) Screws and wall plugs (1) Instruction leaflet 9V 500mA center + power supply (4) “C” alkaline batteries We protect the things that protect you.
PAGE 2
1. Introduction The Outdoor Bell Box is designed to be fitted to the front of the property in a highly visible position, providing a permanent visual deterrent to intruders. If the Wire-Free Home Protection System Smart Panel is triggered, the siren will sound and the strobe light will flash for 1 minute. 2.
PAGE 3
• If the Bell Box fails to alarm, check the following: · House Security Settings are the same as for the Wire-Free Home Alarm Smart Panel. · The ON/OFF switch on the Bell Box is set to the ON position. · The Bell Box is in a location where it can receive a good signal from the Wire-Free Home alarm Smart Panel. • When the Bell Box is switched to ON, removing the Bell Box from the wall surface will trigger the Bell Box siren immediately.
PAGE 4
6. Batteries Do not allow the batteries to corrode or leak as this may cause permanent damage to the product. Take care to insert the batteries with the correct polarity as shown inside the battery compartments. Do not mix new and old batteries or different types of batteries. Do not use rechargeable batteries. At the end of their useful life the batteries should be disposed of via a suitable recycling center. Do not dispose of with your normal household waste. DO NOT BURN. 7.