Instruction Manual

Safety Technology International, Inc.
2
306 Airport Road • Waterford, Michigan 48327-1209
Phone: [phone] • Fax: [phone]
Toll Free: 800-888-4784 • E-mail: [e-mail]
Web: www.sti-usa.com
Safety Technology International (Europe) Ltd.
U
nit 49G Pipers Road • Park Farm Industrial Estate • Redditch
W
orcestershire • B98 0HU • England • Tel: [phone]
Fax: [phone] • Freephone: 0800 085 1678 (UK only)
E-mail: [e-mail] • Web: www.sti-europe.com
INSTALLATION OF STI-9709 HUBBELL CH-EU60 FIXTURE GUARD
All specifications and information shown were current as of publication, and are subject to change without notice.
9709-IS JAN2007
INSTALLATION INSTRUCTIONS
1. Install the 97099 R.H. first by inserting the
threaded weld stud thru the die cast hub,
place washer and nut on stud and tighten.
2. Now do the same with the 97098 L.H. side.
3. After the (2) welds studs have been
tightened install the screws on both ends of
the upper straps. Next move to the bottom
guard and place the (2) center screws thru
the hole in the R.H. and L.H. guards and into
the weld nut on the bottom guard and
tighten. Finish by inserting the screws into
sides of the guard and tighten securely.
EXISTING TRIBAY WA25 SERIES
H
UBBELL BALLAST HOUSING
NOTE: SPUN ALUMINUM REFLECTOR
NOT ILLUSTRATED
BOTTOM GUARD ASSY.
UPPER STRAPS
19076 SCREW
1
/4 - 20 x 1.0 in.
(6) PROVIDED
19077 WASHER
(
6) PROVIDED
97098 L.H. GUARD ASSY.
97099 R.H. GUARD ASSY.
97097 BOTTOM GUARD ASSY.
97097 BOTTOM GUARD ASSY.
97098 L.H. GUARD ASSY.
97099 R.H.
GUARD ASSY.
1
FRONT VIEW
SIDE VIEW
PRODUCT DIMENSIONS
15.5 in.(393mm)
26 in.(660mm)
20 in.
(
508mm)
2
4.5 in.
(622mm)
T
YPICAL GRID
OPENING NOT
TO EXCEED
1
in.(25.4mm)
7
in.(178mm)
97098 L.H.
G
UARD ASSY.
97099 R.H.
G
UARD ASSY.
26 in.(660mm)
SPUN ALUMINUM
REFLECTOR
97098 L.H.
GUARD ASSY.
DIE CAST HUB
19078 1/4 - 20 HEX NUT
(2) PROVIDED
19077 1/4 in.
FLAT WASHER
(6) PROVIDED
WELD STUD
97099 R.H.
GUARD ASSY.
Electronic warranty form at www.sti-usa.com/wc14