Owner's manual

Safety Technology International, Inc.
2
306 Airport Road • Waterford, Michigan 48327-1209
Phone: [phone] • Fax: [phone]
Toll Free: 800-888-4784 • E-mail: [e-mail]
Web: www.sti-usa.com
Safety Technology International (Europe) Ltd.
U
nit 49G Pipers Road • Park Farm Industrial Estate • Redditch
W
orcestershire • B98 0HU • England • Tel: [phone]
Fax: [phone] • Freephone: 0800 085 1678 (UK only)
E-mail: [e-mail] • Web: www.sti-europe.com
INSTALLATION OF STI-9115 TAMPERPROOF THERMOSTAT COVER
All specifications and information shown were current as of publication, and are subject to change without notice.
9115 APRIL2009
CLEANING INSTRUCTIONS:
To clean cover, remove from wall. Rinse with water to remove abrasive dust
and dirt. Wash with soap or mild detergent using a soft cloth (DO NOT
SCRUB). Rinse once more, then dry with a soft cloth or chamois. To remove
grease or wet paint, rub gently with a cloth wetted thoroughly with
naphtha. Then wash and rinse. DO NOT USE RAZOR BLADES.
EXISTING THERMOSTAT WITH
D
ECORATIVE BEZEL
COVER
19049 WASHER (6) PROVIDED
19038 SPANNER BIT
(1) PROVIDED
19036 TAMPERPROOF SPANNER
HEAD SCREW #8 x 1 1/2 in.
(6) PROVIDED
19018 ANCHOR
(6) PROVIDED
INSTALLATION INSTRUCTIONS
1. Center protective cover over thermostat.
2. Using protective cover as template, mark and drill
(6) 3/16 in. (4.7mm) diameter holes as shown.
3. Install the tamperproof fasteners using the supplied
spanner bit.
EXISTING THERMOSTAT WITH
DECORATIVE BEZEL
9.37
i
n
.(238m
m
)
2
.
8
7
in.
(
7
3
m
m
)
7
.37 in. (187mm)
1
PRODUCT DIMENSIONS
Electronic warranty form at www.sti-usa.com/wc14