User guide

STEP 1 - MOUNTING OPTIONS
4
INSTALLATION OF ALARM
O
DRILL
3-/16 DIA HOLES
19018 ANCHOR
#8-10
(2) PROVIDED
19039 SCREW
#6 x 1 1/4 in.
(2) PROVIDED
BASE PLATE
18074 SWITCH LOCK
SUB-SA505 KEY SWITCH
MOUNTING BRACKET
3 9/32 in.
18075 REPLACEMENT
#801 KEY
O
TO KEY MOUNT PLATE OR INTO WALL WITHOUT ELECTRICAL BOX
ENCLOSURE
ROUTE THE TWO KEY
SWITCH WIRES THROUGH
THE HOLE AS SHOWN
WIRE ACCESS HOLE
ROUTE THE TWO REED
SWITCH WIRES FROM
CABINET THROUGH THE
HOLE AS SHOWN
E
INSTALLATION OF CABINET
1. Insert the (4) 06298 mounting tabs fully into
back box mounting tab slots. Use rubber mallet
if necessary.
2. After selecting a suitable location, place cabi-
net in closed position, against the wall. Mark
and drill (4) 1/4 in. diameter holes. Insert the
(4) 19033 anchors. Mount cabinet by driving
in the four #10 x 1 1/2 in. screws.
Note: Installation of cabinet
should be before instal-
lation of alarm because
the mounting bracket
butts up to cabinet.