User Manual

Safety Technology International, Inc.
2
306 Airport Road • Waterford, Michigan 48327-1209
Phone: [phone] • Fax: [phone]
Toll Free: 800-888-4784 • E-mail: [e-mail]
Web: www.sti-usa.com
Safety Technology International (Europe) Ltd.
U
nit 49G Pipers Road • Park Farm Industrial Estate • Redditch
W
orcestershire • B98 0HU • England • Tel: [phone]
Fax: [phone] • Freephone: 0800 085 1678 (UK only)
E-mail: [e-mail] • Web: www.sti-europe.com
INSTALLATION OF SNOOPER STOPPERS
®
STI-7504 AND STI-7505
All specifications and information shown were current as of publication, and are subject to change without notice.
STI-750405IS AUG2006
7
50098 GASKET
CENTER GASKET AROUND EXISTING KEYPAD
M
ARK AND DRILL (6) 3/16 in.(4.7mm) DIAMETER
HOLES 7/8 in.(22mm) DEEP
STI-7504 ENCLOSURE (CLEAR)
STI-7505 ENCLOSURE (SMOKE)
REMOVE BACKING
PAPER AND APPLY
TOWARD MOUNTING
SURFACE.
AFTER INSTALLATION IS
COMPLETE THIS AREA
OF GASKET MAY BE
CUT AND REMOVED
EXISTING KEYPAD UNIT
19014 SCREW #8 x 1 in.
(6) PROVIDED
19018 ANCHOR
(6) PROVIDED
CLEANING INSTRUCTIONS
1. Rinse cover with water to remove abrasive dust and dirt.
2. Wash with soap or mild detergent using a soft cloth. (DO NOT SCRUB.)
3. Rinse once more, then dry with a soft cloth or chamois.
4. To remove grease or wet paint, rub gently with a cloth wetted thoroughly
with naphtha, then wash and rinse. (DO NOT USE RAZOR BLADES.)
4 in.
(101mm)
TOP
VIEW
5.5 in.
(139mm)
FRONT VIEW
4
.75 in.
(
120mm)
8
.75 in.
(222mm)
6.75 in.
(
171mm)
INSTALLATION INSTRUCTIONS
1. Place the cover over the appliance. Be sure that it
is accessible through the front opening in cover.
2. Mark and drill 7 holes 3/16 in. (4.7mm).
3. Complete assembly as shown.
Electronic warranty form at www.sti-usa.com/wc14