Manual

Safety Reference • Owner’s Manual • All Model 2011 Firearms

4. Remove the firing pin spring

from the firing pin by turning the

firing pin clockwise and pulling

off the spring.

Extractor Removal

1. Firmly grasp the back of the slide with the muzzle end towards you

and the underside of the slide facing up. Press firmly against the

front of the extractor using a 1/8” punch tool. Push the tip of the

extractor towards the side of the breach while depressing the extrac-

tor tip, until the extractor passes the extractor hold located at the

back of the breach face.

2. Turn the slide around so the rear of the slide faces up, exposing the

back end of the partially-removed extractor. Pull the extractor from

the back of the slide. Use the punch tool as required to assist in

releasing the extractor from its position.