Manual

Safety Reference • Owner’s Manual • All Model 2011 Firearms

• Check firearm storage frequently, to be certain the location remains

secure and has not been violated in any way.

WARNING!

Store firearms and ammunition separately, under lock and out of the

sight of and beyond reach of children, minors, and adolescents.

HANDGUN MAINTENANCE - DISASSEMBLY

WARNING!

Always remove the magazine and any ammunition in the firearm’s

chamber before disassembly. Always wear safety goggles during

disassembly and reassembly to protect your eyes while handling

spring-loaded parts.

General preparations…

• Choose a clean, stable surface at which to comfortably disassemble the

firearm. Allow sufficient room to place the parts removed from the

firearm without interfering with the disassembly process. To prevent

damage to the firearm, disassemble the firearm on a clean, lint-free cloth.

• Read through the entire disassembly procedure before attempting to

disassemble any of the STI model handguns

• The following disassembly procedure requires manual dexterity and

specific tools. Seek the service of a qualified gunsmith for assistance if

you are uncertain of your ability to perform the following disassembly

process.

• Contact STI International for further clarification or instructions should

any of the parts or assemblies shown in the disassembly process of this

manual appear different from those found on your STI model.

Tools and supplies:

Your STI handgun is a precision assembly. Only high-quality tools and

supplies should be used when working on it.

Safety goggles

5/32” Hex wrench

1/8” Dia. Steel punch

Lint-free cloths

Small non-marring hammer (optional)