User's Manual
Appendix C Hayes Reference
Crescendo UHF Half-Duplex User Manual Page 71 of 78
Command
Name
Notes
ATS91
Main Port CTS Mode
Note that this command cannot have a [p] port
specifier.
0: Always High
1: Always Low
2: Mirrors DTR
3: Mirrors RTS
4: Follows Rx Carrier
5: Follows Tx Enable
6: Follows Online
ATS92
Get Main Port DTR
Note that this command cannot have a [p] port
specifier.
0: Line is not asserted.
1: Line is asserted.
ATS93
Get Main Port RTS
Mode
Note that this command cannot have a [p] port
specifier.
0: Line is not asserted.
1: Line is asserted.
ATS100
Baud
0: 110
1: 300
2: 600
3: 1200
4: 2400
5: 4800
6: 9600
7: 14400
8: 19200
9: 38400
10:57600
11:115200
ATS101
Parity
0: None
1: Even
2: Odd
ATS102
Data Bits
0: 7
1: 8
ATS103
Stop Bits
0: 1
1: 2
ATS104
Main Port Flow Control
Note that this command cannot have a [p] port
specifier.