User's Manual

Hayes AT Reference
RFI-148 & RFI-900 High Output Power Paging Transmitters User Manual Page 93 of 134
Where: a = Transmit Power Variation table index (starting from 0).
Can return the following error codes:
1 = Invalid cutoff value. Upper cutoff > Lower cutoff
3 = Hysteresis value too large for configured cutoffs.
250W Upper Cutoff (Stored)
ATG166[a]: Returns the current value of 250W Upper Cutoff.
ATG166[a]=[+/-]n.: Sets the value of 250W Upper Cutoff to n , given that -2147483648 <= n <=
2147483647.
Where: a = Transmit Power Variation table index (starting from 0).
Can return the following error codes:
1 = Invalid cutoff value. Upper cutoff > Lower cutoff
3 = Hysteresis value too large for configured cutoffs.
Other Table
Name
Name of the sensor and its unit in this row of the table.
ATG167[a]: Returns the current value of Name.
Where: a = Other table index (starting from 0).
Lower Cutoff (Stored)
ATG169[a]: Returns the current value of Lower Cutoff.
ATG169[a]=[+/-]n.: Sets the value of Lower Cutoff to n , given that -2147483648 <= n <= 2147483647.
Where: a = Other table index (starting from 0).
Can return the following error codes:
1 = Invalid cutoff value. Upper cutoff > Lower cutoff
3 = Hysteresis value too large for configured cutoffs.
Upper Cutoff (Stored)
ATG168[a]: Returns the current value of Upper Cutoff.
ATG168[a]=[+/-]n.: Sets the value of Upper Cutoff to n , given that -2147483648 <= n <= 2147483647.
Where: a = Other table index (starting from 0).
Can return the following error codes:
1 = Invalid cutoff value. Upper cutoff > Lower cutoff
3 = Hysteresis value too large for configured cutoffs.
Temperature Sensors Table
Voltage Sensors Table
Current Sensors Table
Fan Speeds Table
Power Table
Ratio Table
Faults Menu
Total Faults Counter
ATI156: Returns the current value of Total Faults Counter.
Active Faults
ATI157: Returns the current value of Active Faults.