User's Manual

Hayes AT Reference
RFI-148 & RFI-900 High Output Power Paging Transmitters User Manual Page 87 of 134
ATS222: Returns the current value of Key Generator.
ATS222=n sets Key Generator to n.
Enumeration values:
0 = Disabled
1 = Enabled
Vendor (Stored)
ATS223: Returns the current value of Vendor.
ATS223=n sets Vendor to n.
Enumeration values:
0 = TPL
End Password Session
ATS224: Runs the End Password Session routine.
Password
ATS225: Returns the current value of Password.
ATS225=s: Sets the value of Password to s, given that 0 <= length(s) <= 17.
Encryption ID (Stored)
ATS233: Returns the current value of Encryption ID.
ATS233=s: Sets the value of Encryption ID to s, given that 1 <= length(s) <= 6.
Key Generator Table
Capcode (Stored)
ATS226[a]: Returns the current value of Capcode.
ATS226[a]=n.: Sets the value of Capcode to n , given that 0 <= n <= 2097151.
Where: a = Key Generator table index (starting from 0).
Can return the following error codes:
1 = Enable the Key Generator to generate keys from capcodes.
Upper Value (Hex)
ATS227[a]: Returns the current value of Upper Value (Hex) .
Where: a = Key Generator table index (starting from 0).
Lower Value (Hex)
ATS228[a]: Returns the current value of Lower Value (Hex) .
Where: a = Key Generator table index (starting from 0).
Key Entry Table
Top Value (Hex) (Stored)
ATS229[a]: Returns the current value of Top Value (Hex).
ATS229[a]=s: Sets the value of Top Value (Hex) to s, given that 0 <= length(s) <= 32.
Where: a = Key Entry table index (starting from 0).
Can return the following error codes:
1 = Incorrect length - expected 16 characters.
2 = Invalid character(s) - please enter only 0-9 and A-F.
3 = Disable the Key Generator to manually enter keys.
Upper Value (Hex) (Stored)