User's Manual

Hayes AT Reference
RFI-148 & RFI-900 High Output Power Paging Transmitters User Manual Page 86 of 134
Where: a = Profiles table index (starting from 0).
Can return the following error codes:
1 = External data clock required for 4-level protocol
2 = Insufficient access
3 = Warning! External data clock now enabled.
Carrier Offset (Stored)
Configured carrier frequency offset for this profile.
ATP92[a]: Returns the current value of Carrier Offset.
ATP92[a]=[+/-]n.: Sets the value of Carrier Offset to n Hz, given that -4000 <= n <= 4000.
Where: a = Profiles table index (starting from 0).
Can return the following error codes:
1 = External data clock required for 4-level protocol
2 = Insufficient access
3 = Warning! External data clock now enabled.
Ext. Data Clock (Stored)
Configures whether to use an external clock to synchronise data. An external clock is mandatory for 4-level
protocols.
ATP93[a]: Returns the current value of Ext. Data Clock.
ATP93[a]=n sets Ext. Data Clock to n.
Enumeration values:
0 = Disabled
1 = Enabled
Where: a = Profiles table index (starting from 0).
Can return the following error codes:
1 = External data clock required for 4-level protocol
2 = Insufficient access
3 = Warning! External data clock now enabled.
Encryption Menu
Encryption (Stored)
ATS220: Returns the current value of Encryption.
ATS220=n sets Encryption to n.
Enumeration values:
0 = Disabled
1 = Enabled
Can return the following error codes:
1 = WARNING - The current time does not appear to be valid, please correct to ensure message tampering
can be determined.
Encrypt All (Stored)
ATS221: Returns the current value of Encrypt All.
ATS221=n sets Encrypt All to n.
Enumeration values:
0 = False
1 = True
Key Generator (Stored)