User's Manual

Hayes AT Reference
RFI-148 & RFI-900 High Output Power Paging Transmitters User Manual Page 83 of 134
Purge Timeout (Stored)
Duration to wait to collate paging messages for sending over the air.
ATN29: Returns the current value of Purge Timeout.
ATN29=n.: Sets the value of Purge Timeout to n ms, given that 250 <= n <= 5000.
Reset Statistics
ATN40: Runs the Reset Statistics routine.
Tx Delay (Stored)
Duration to wait before transmitting any page message.
ATN50: Returns the current value of Tx Delay.
ATN50=n.: Sets the value of Tx Delay to n s, given that 0 <= n <= 60.
Page Repeat Rules Table
Enabled (Stored)
Whether this rule is enabled.
ATN36[a]: Returns the current value of Enabled.
ATN36[a]=n sets Enabled to n.
Enumeration values:
0 = False
1 = True
Where: a = Page Repeat Rules table index (starting from 0).
Capcode (Stored)
The Capcode to match for this rule. 0 matches any capcode, all other integers match the specific capcode.
ATN37[a]: Returns the current value of Capcode.
ATN37[a]=n.: Sets the value of Capcode to n , given that 0 <= n <= 2097152.
Where: a = Page Repeat Rules table index (starting from 0).
Delay (Stored)
The delay to insert between page repetitions.
ATN38[a]: Returns the current value of Delay.
ATN38[a]=n.: Sets the value of Delay to n s, given that 4 <= n <= 60.
Where: a = Page Repeat Rules table index (starting from 0).
Count (Stored)
The number of times to repeat pages.
ATN39[a]: Returns the current value of Count.
ATN39[a]=n.: Sets the value of Count to n , given that 1 <= n <= 5.
Where: a = Page Repeat Rules table index (starting from 0).
POCSAG MAC Statistics Table
Name
ATN34[a]: Returns the current value of Name.
Where: a = POCSAG MAC Statistics table index (starting from 0).
Count
ATN35[a]: Returns the current value of Count.
Where: a = POCSAG MAC Statistics table index (starting from 0).
Test Menu